PHP 400.00 HIGH POWER MOS TUBE FET TRIGGER DRIVE MODULE PWM ELECTRONIC SWI

High Power MOS tube FET trigger Drive Module PWM Electronic Switch Control Board

Product Description
Highlights:
The module supports high-level trigger, low-level trigger, switch control, PWM control;
The use of imported dual-MOS parallel active output, lower internal resistance, current, power strong, continuous current at room temperature is 10A, 600W, to meet most of the equipment used;
Wide voltage input: DC 4V ~ 60V;
Easy to control high-power equipment.

Note:
At the same time, there is only one signal to control the module, can not use two or more signals to control the module;
High level trigger voltage range: DC3.0V ~ 24V, the trigger signal in the 3.0V ~ 24V, MOS tube conduction; less than 0.6V, that is 0V ~ 0.6V, MOS tube is closed; signal voltage must not 0.6V ~ 3.0V, because the MOS tube is not fully open, high-power output will burn MOS;
Low-level trigger voltage range: DC 0V ~ 0.6V, that trigger signal in the 0V ~ 0.6V, MOS tube conduction; higher than 3.0V, MOS tube is closed; signal voltage must not be 0.6V ~ 3.0V , Because the MOS tube is not fully open, high-power output will burn MOS.
Product parameters:

Operating voltage: DC 4V - 60V;
Trigger source: high level trigger (DC3.0V - 24V), low level trigger (DC 0.0V ~ 0.6V), switch control, can connect MCU IO port, PLC interface, DC power supply, etc. PWM signal, support signal frequency range of 0 - 2.5KHZ.
Output capacity: DC 4V - 60V, continuous current 10A at room temperature, power 600W! Auxiliary cooling conditions, the current up to 15A.
4.Life: unlimited switch;

Working temperature: -40-85 ?;
Size: 3.4 * 1.7 * 1.2cm

Application:
It can control high-power equipment, such as motors, bulbs, LED lights with, DC motors, micro-pumps, solenoid valves and so on. If you enter the PWM signal, you can control the motor speed, lamp brightness and so on.

Package Includes:
1 x High Power MOS tube FET trigger Drive Module PWM Electronic Switch Control Board





*****SERIOUS BUYERS ONLY PLEASE*****


Contact number: 09333-888-611

Do payment first before your item would be shipped on that schedule date. NO COD option.

Mode of payment is either thru GCASH, BPI, LBC or PALAWAN Express, PAYPAL(+4.5%+15), CASH for meetups.

Provincial buyers, you'll pay for the added shipping cost:

Via LBC: Starting Oct 15,2018 LBC rates up (till 1 Kilo weight)
165.00 (Metro Cebu)
200.00 (Visayas)
200.00 (Metro Manila)
215.00 (Luzon/Mindanao)
+ 5php insurance for every 500 declared value.

Via JRS: Letter pouch till 100 grams (now compulsory insurance of 2php per 100 declared value) New increase Starting Sept. 01,2018
125 (Metro Manila) + insurance
128 (Luzon) + insurance
107 (Visayas) + insurance
120 (Mindanao) + insurance

1 Pounder Pouch
153 (Metro Manila) + insurance
156 (Luzon) + insurance
130 (Visayas) + insurance
145 (Mindanao) + insurance

Schedule for sending parcels is M-W-F ONLY. Payments should be received in the morning of MWF if you want your item to be shipped on that scheduled day. As I leave by lunch to send out of town orders already. Otherwise, it would be on the next schedule date. Thanks!





blakicez
Complete ads list at goo.gl/VWNeyz