PHP 500.00 PCA9685 16-CHANNEL 12-BIT I2C PWM DRIVER SERVO DRIVER

PCA9685 16-channel 12-bit i2c PWM Driver Servo Driver For Arduino

Description:
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts.

Or maybe you want to drive a lot of LEDs with precise PWM output.

Then you realize that your microcontroller has a limited number of PWM outputs! What now?

Using only two pins, control 16 free-running PWM outputs!
You can even chain up 62 breakouts to control up to 992 PWM outputs
• Its an i2c-controlled PWM driver with a built in clock. That means that,
unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller,
its completely free running!
• It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs
(this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
• 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs - thats a lot
of servos or LEDs
• Adjustable frequency PWM up to about 1.6 KHz
• 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
• Configurable push-pull or open-drain output
• Output enable pin to quickly disable all the outputs
We wrapped up this lovely chip into a breakout board with a couple nice extras
• Terminal block for power input (or you can use the 0.1" breakouts on the side)
• Reverse polarity protection on the terminal block input
• Green power-good LED
• 3 pin connectors in groups of 4 so you can plug in 16 servos at once
(Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
• "Chain-able" design
• A spot to place a big capacitor on the V+ line (in case you need it)
• 330 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
• Solder jumpers for the 6 address select pins

Package Includes:
1 x PCA9685 16-channel 12-bit i2c PWM Driver Servo Driver






SERIOUS BUYERS ONLY PLEASE

Contact number: 09333-888-611

Do payment first before your item would be shipped on that schedule date. No COD option.

Mode of payment is either thru GCASH, BPI, LBC or PALAWAN Express, PAYPAL(+4.5%+15), Cash for meetups.

Provincial buyers, you pay for the added shipping cost:
Via LBC: 175.00 (Visayas) or 180.00 (Metro Manila) or 185.00 (Luzon/Mindanao) + 5php insurance for every 500 declared value.

Via JRS: 99.00 (Visayas) or 104.00 (Luzon/Mindanao)

Schedule for sending parcels is M-W-F ONLY. Payments should be received in the morning of MWF if you want your item to be shipped on that scheduled day. As I leave by lunch to send out of town orders already. Otherwise, it would be on the next schedule date. Thanks!





blakicez
Complete ads list at goo.gl/VWNeyz