CARBIDES BLANKS INSERTS AND CARBIDE TIPPED TOOLBITS

All the carbide-tipped tool bits on the photos have U.S. carbides and are very very hard and tough. Prices are as follows:
3/8 carbide-tipped tool bit: PhP 70
1/2 carbide-tipped tool bit: PhP 100
5/8 carbide-tipped tool bit: PhP 130
1-1/4 carbide tipped tool bit, left and right AL-20 and AR-20: PhP 500
1-1/2 carbide tipped tool bit, left AL-24: PhP 600
1/2 x 1 carbide tipped cut off tool bit: PhP 300

Also availabe:
Diamond and triangle (60 degrese) shaped US-made carbide inserts with hole for carbide insert tool holders. Bulk orders of 5 pcs and above only are accomodated. Dimensions of the diamond shaped carbide inserts shown above are as follows:
16 mm x 16 mm x 4.75 mm thick with 3 mm hole dia.
14 mm x 14 mm x 5 mm thick with 5 mm hole dia.
16 mm x 16 mm x 6.5 mm thick with 6 mm hole dia.
19 mm x 19 mm x 6.5 mm thick with 8 mm hole dia.
Carbide holders will cost PhP PhP 600 to 1000 depending on size of handle.
Each kind of carbide is PhP 100/pc. Only accepting minimum of 10 pcs orders and above.