WATERPROOFING LATICRETE

HYDRO BAN®

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.

Allow for flood testing in 2 hours at 70°F (21°C) or higher¥
Does not require the use of fabric.*
Bonds directly to metal, PVC and ABS plumbing fixtures only
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Changes in color from a light sage to an olive green when cured
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Exceeds ANSI A118.10 and A118.12
IAPMO approved
Contains Microban® antimicrobial product protection
Rapid drying for a faster time to tile
Lighter color for ease of inspection
Safe—no solvents and non-flammable
Install tile, brick and stone directly onto membrane

* For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions

Â¥ Refer to cautions section for more information on curing

for inquiry look for anne laureano
09322347661
email at [email protected]